Auto Provisioing - Polycom phones
Following is the
procedure for provisioning Polycom Phones
Ensure the MAC ID has been
added to the number in our system through Extension Page - and then:
1) OPTIONAL -- reset to factory pressing 1,3,5 and 7 or 4,6,8 and * depending on the phone modela) IP 301, 501, 550, 600, 601 & 650: 4,6,8,*
b) IP 320, 330, 430 & 560: 1,3,5,7
c) IP 4000 : 6,8,*
d) Enter 456 as password and then press OK
2) When Phone is rebooting, click on setup button
3) Enter 456 and then press OK
4) Using up and down key, move down to DHCP Menu: then Press SELECT button
5) Select BOOT SERVER to Static then OK
6) Then Exit7) use down key to Server Menu: then Press SELECT button
8) Server Type to HTTP then OK
9) Server Address: enter phone.fibrehub.com then OK, then Exit, Exit again
10) SELECT to save